张玖传,刘杰.新老混凝土中钢筋通电加速锈蚀特性试验研究[J].水电能源科学,2019,37(1):95-97
新老混凝土中钢筋通电加速锈蚀特性试验研究
Experimental Study on Accelerated Corrosion Behavior of Shear Reinforcement in New and Old Concrete
  
DOI:
中文关键词:  新老混凝土  钢筋锈蚀  锈蚀率  锈蚀效率
英文关键词:new and old concrete  steel bar corrosion  corrosion rate  corrosion efficiency
基金项目:国家自然科学基金项目( 51641807);湖北省自然科学基金项目(2018CFB664);宜昌市大学应用基础研究项目(A18-302-a14)
作者单位
张玖传,刘杰 三峡大学 土木与建筑学院 湖北 宜昌 443002 
摘要点击次数: 211
全文下载次数: 
中文摘要:
      为研究新老混凝土中抗剪钢筋锈蚀的相关特性,采用通电加速锈蚀方法分析了设计锈蚀率分别为5%、10%条件下新老混凝土中抗剪钢筋的锈蚀特性,探究了不同位置处钢筋锈蚀的异同。结果表明,混凝土浇筑面锈蚀率大于非浇筑面;钢筋锈蚀率和锈蚀效率与混凝土强度呈正相关关系;设计锈蚀率10%较5%的锈蚀效果更好;新老混凝土结合面处钢筋锈蚀情况较其他地方严重。
英文摘要:
      The related characteristics of corrosion resistance of shear reinforcement in new and old concrete were studied. The method of electrifying accelerated corrosion was adopted to analyze the characteristics of shear reinforcement in new and old concrete under the condition of design rust rate of 5% and 10% respectively. The similarities and differences of steel corrosion at different locations were explored. The results show that the corrosion rate of concrete pouring surface is larger than that of non-pouring surface; The corrosion rate and corrosion efficiency of steel are positively correlated with concrete strength; The corrosion efficiency at the design corrosion rate 10% is better than that in 5%; The steel corrosion at the concrete joint surface is more serious than other places.
查看全文  查看/发表评论  下载PDF阅读器